Corporate Training By Zack Academy - National Electrical Code - Revisions Impacting Electrical Installation

Why Should You Take This National Electrical Code - Revisions Impacting Electrical Installation Course?

This National Electrical Code - Revisions Impacting Electrical Installation Course covers the 2014 NEC Code changes that were made to continuously improve upon the exiting methods of electrical installation. This course covers in detail the changes to the codes and instructs students in the areas in which they will need to be made aware of the changes in order to comply with the updated codes.

The National Electrical Code (NEC) is a standard for electrical safety and is concerned with the installation and use of electrical products. The NEC governs the installation of wires and electrical products installed in our homes and businesses. IEC believes electrical contractors should participate and help to develop the rules and regulations that govern their industry.

The Following Topics Will Be Covered:

The topics covered in this course reflect the 2014 National Electric Code Changes in these areas:

1. NEC Facts
2. Article 750 Energy Management Systems
3. Increasing 600V Requirements to 1000V
4. Code 110.26(C)(3) - Personnel Doors
5. Code 210.8(A) - GFCI (Dwellings) - Laundry
6. Code 210.8(D) - GFCI (Dwellings) - Kitchen Dishwashers
7. Code 210.12 - AFCI120V - Dwelling Units
8. Code 210.12 - AFCI120V - Dormitory Units
9. Code 210.12(A)(5) & 210.12(A)(6) - Install Outlet Branch Circuit
10. Code 20.12 Exception - Lighting Loads for Specified Occupancies
11. Code 240.87 - Arc Energy Reduction
12. Code 310.15(B)(7) - 120/240V - Single Phase, Services, and Main Power
13. Code 406.9(B)(1) - Expands the "Extra Duty"
14. Article 517 Healthcare Facilities
15. Code 517.19(B) - Patient Bed Location Receptacles
16. Code 517.19(C) - Operating Room Receptacles
17. Code 517.26 - Application of Other Articles
18. Article 625 EV - Supply Equipment Requirements
19. Code 690.17(A) - Disconnect Type
20. Code 700.8 - Surge Protection Emergency Systems
21. Code 700.16 - Emergency Illumination
22. Code 705.31 - Location of Overcurrent Protection